Frequently Asked Questions

Annual failure rate is below 1.5%. Without wearable gear components, unexpected production downtime is greatly reduced.

24-hour free remote diagnosis, program debugging and fault troubleshooting. Most electrical and synchronous faults can be fixed remotely without on-site engineer support.

It supports global standard sleeve specifications. We can customize roller dimensions to match your current printing tools with zero extra replacement cost.

Standard service life reaches 15 years. No gear abrasion ensures stable printing accuracy without attenuation in long-term use.

English is standard. Spanish, French, Portuguese, Russian and other language versions are available for free customization.

Root causes: tension sudden fluctuation, encoder signal interference, loosely locked printing sleeves. Solutions: optimize closed-loop tension parameters, enhance machine grounding shielding, re-lock all sleeves tightly.

The original tension buffer parameter mismatches joint feeding. Optional automatic splicing register compensation function can recover precise register within 3 meters after material joint.

Caused by unbalanced rotating rollers or uneven printing pressure. Solutions: calibrate roller dynamic balance, adjust independent servo printing pressure for each color unit separately.

Excessive rewinding tension or insufficient post-drying cooling volume. Solutions: set taper rewinding tension curve, add independent cooling fans behind drying oven.

Match an industrial voltage stabilizer for stable power supply. Built-in anti-interference program adapts to most unstable power grid environments worldwide.

Excessive ink transfer pressure. Each printing unit adopts independent servo micro-pressure adjustment to keep original dot integrity perfectly.

No. All order recipes, tension data and servo synchronous parameters are saved in industrial flash memory, never lost after power failure.

Yes. Equipped with high-precision joint detection sensor, the machine automatically pauses printing and skips splicing sections to avoid defective products.

Applicable working temperature range: 0℃ ~ 45℃. The whole servo system keeps stable startup and operation in cold factory workshops.

CI flexo is usually the strongest starting point for food packaging because it delivers better registration on film, stable color reproduction, and longer run efficiency. Final selection still depends on material, width, speed, and ink system.

Paper bag production often works well with stack flexo or other configurations that handle paper substrates efficiently. The right choice depends on line width, color count, and whether the buyer prioritizes changeover speed or flexibility.

Yes, flexo can print on non-woven substrates when the machine, ink, and drying setup are matched correctly. Non-woven bag printing usually needs stable tension control and practical drying performance.

CI flexo is often preferred for faster changeover, lower running cost, and strong flexibility across packaging SKUs, while gravure can be favored for certain high-volume jobs. The best choice depends on your target product mix and economic model.

Use King for higher-speed flexible packaging work, Master for broader packaging applications, and Honor for stack-style applications such as labels or specific substrate families. Matching the series to your product mix is more important than raw speed alone.

Compare width range, speed, servo architecture, drying system, changeover time, substrate compatibility, case studies, spare parts support, and after-sales response. A parameter sheet is not enough without delivery proof.

Gearless flexo improves registration accuracy, reduces mechanical wear, and shortens job changeover time. It is especially valuable for buyers with many SKUs and high expectations for repeat quality.

Drying determines ink curing speed, production stability, and substrate compatibility. A strong drying system helps maintain throughput without sacrificing quality or causing unnecessary waste.

Yes. Servo systems help improve synchronization and repeatability, which matters in packaging production where registration and waste control directly affect margins.

Yes. The site now includes country landing pages and the sales process can be matched to high-intent markets such as India, Turkey, Saudi Arabia, and Egypt.

Yes. Country pages are designed to support local SEO and buyer education, so you can start from regional demand and then move into machine selection.

Start from your country page, then move to the related industry page and the product page. That sequence helps align regional demand, application, and machine configuration.